• SMOK
  • Joytech
  • Vaporesso
  • Vandyvape
  • I joy
  • JOMO
  • Kangertech
  • Nasty Juice
  • Geek Vape
  • Tasty
  • Next Big
  • Fantasi
  • Nudeman
  • Sigelei
  • Uwell
  • Twelve Monkey
  • Area 51
  • Signature Eliquid
  • Zombie


Sort By:  

The Kylin RTA from Vandy Vape features a 2ml juice capacity, plenty of air holes in the bottom and side directly and is available for use in both single and double coil configurations.

1 x Kylin RTA
1 x 14mm Delrin Drip Tip
1 x 17.5mm Wide-Bore Delrin Drip Tip
1 x Chimney
1 x 6ml Pyrex Glass
1 x Accessory Bag

24mm Diameter
2ml Capacity
Available For Use In Both Single and Dual Coil
Pyrex Glass Reinforcement
Innovative Postless, Quad Terminal Design
Two PEEK-Insulated Positive Terminal Posts
Two Negative Terminal Posts
24K Gold-Plated Build Deck
Dual External Adjustable Airflow
Dual Centralised Internal Airslots
Dual Slanted Internal Airslots
Convenient Threaded Top-Fill Design
14mm Wide Delrin Widebore Drip Tip
16mm Wide Delrin Widebore Drip Tip
17.5mm Wide Delrin Widebore Drip Tip
510 Drip Tip Adapter
Gold-Plated 510 Contact Pin

The Aspire K3 Tank is a luxurious mouth-to-lung tank with an amazingly low price. The K3 Tank uses Aspire’s famous Nautilus BVC Coils for longer atomizer life and fuller flavours. Along with the high-spec coils, the K3 Glassomizer has an acid resistant Pyrex glass tank and a replaceable 510 drip-tip. The Aspire K3 takes a 2ml fill of e liquid.

This spectacular glassomizer takes cigarette style, mouth-to-lung vaping a few steps closer to sub-ohming. With fractionally wider airflow delivering a little more cloud capacity, the K3 Glassomizer can turn any mid-power, 18mm diameter battery into a 5 star vape!

Styled just like a sub-Ohm tank, the Aspire K3 comes with a removable, 510 drip-tip. Customise your K3 with any 510 drip-tip that takes your fancy from your local vape store. Pre-set airflow is channelled through the base of the glassomizer, up into a replaceable, 1.8 Ohm Nautilus BVC coil head. To maximise flavour, the coil head is packed with pure organic cotton. With their low price and longer lifespan, Nautilus BVC coils are ideal for vaping on a budget.

The K3 Glassomizer has a simple bottom-fill mechanism. Unscrewing the bottom section of the glassomizer gives you easy access to the tank for adding fresh e liquid. Be sure to drip your e liquid down the inside of the glass and not into the chimney. Coil changes are just as quick and easy. Simply unscrew the old coil and replace it with a new one – job done in less than two minutes!

The Aspire K3 Glassomizer sets the new standard for mouth-to-lung vaping with a mid-power, pen style mod. This tank can be used a replacement for the Aspire K3  tank

Available with a Black or Stainless Steel finish.

Note: E Liquid isn’t supplied with this item. Please order separately from our range of excellent flavours. Click here for link previous.

1 x Aspire K3 Glassomizer Tank
1 x Aspire 1.8 Ohm Nautilus BVC Atomizer Coil Preinstalled
1 x Stainless Steel 510 Drip Tip (Pre-Fitted)
1 x Filling & Coil Change Manual

Aspire K3 Glassomizer Features:
Capacity: 2ml
Diameter: 18mm
Regular 510 battery screw connector 
Compatible with any low/mid power 510 battery
Comes with 1 x 1.8 Ohm Nautilus BVC coils (4.2 to 5V) preinstalled
1 coil pre-fitted + 1 spare
510 stainless steel drip tip (replaceable)
Acid & heat resistant Pyrex tank glass
Fast bottom fill facility
Easy coil changing
Pre-set airflow (mouth to lung)
Top quality design & manufacture
Great value for money
Extra cloud volume
Exceptional e liquid flavour
Comes with a Stainless Steel or Black finish.
Aspire Cleito EXO Tank

The Cleito has levelled up! Aspire have now released a 3rd evolution of their popular tank, the Cleito Exo. Bringing you a redesigned TPD compliant 2ml tank with the new top-side airflow system to take vaping to the next level. Top fill, easy to disassemble for ultra low maintenance and convenience for everyday use. This tank utilises the well established Cleito coils which are also backwards compatible.

1 x Aspire Cleito Exo Tank
2 x Cleito 0.16ohm Coil (1 Preinstalled)
1 x Extra Drip Tip
2 x Extra O-Rings
1 x Warranty Card
1 x User Manual

Fully Interchangeable Coils with Cleito Tank
Capacity: 2ml
Top Airflow Design


Smok Spirals Tank- 100 % ORIGINAL - UK STOCK

SMOK Spirals Sub-Ohm Tank Features:

22mm Diameter

2mL Juice Capacity

Superior Stainless Steel Construction Pyrex Glass Reinforcement

Flavor-Focused Structural Design

Spirals Coil Structure - Large Sized Coil Heads

0.6ohm Spirals Dual Core - rated for 18 to 35W

0.3ohm Spirals Dual Core

Spirals RBA Head - Single-Coil Configuration

Threaded Top-Fill Method

Quad Adjustable Bottom Airflow

Elongated Widebore Drip Tip

510 Connection


1 Spirals Tank

1 0.6ohm Spirals Dual Core

1 0.3ohm Spirals Dual Core

1 Spirals RBA Head

1 Replacement Glass Tube

Spare Parts

Instructional Manual


The Aspire Cleito Tank features a unique airflow system and the chimney section of the tank has been replaced with the actual coil itself. The Cleito also features a 2ml capacity, is top filling and includes a heat-resistant delrin drip tip for use with higher wattages / temperatures.

1 x Aspire Cleito Tank
1 x Replacement Glass Tube
1 x Vape Band
4 x Rubber Cuffs
1 x Replacement Coil

2ml Capacity
Top Filling
Stainless Steel (304)
Wide Bore Delrin Drip Tip
Available in Black or Stainless Steel
Cleito Cuffs Dissipate Heat
0.2 ohm (55 - 70W)
0.4 ohm (40 -60W)


The latest e-cigarette clearomizer from Aspire features the acclaimed BVC Coils; meaning you get great technology for an affordable price. The K1 is a smaller capacity tank, but one that is both durable and performs very well.

1 x K1 Glassomizer by Aspire

Stainless Steel Drip TIp
Pyrex Glass Tank
1.5ml Capacity
BVC Coil
Size: Φ14.5mm * 72mm

Ego Compatible


With a slim 15mm profile, the Aspire K2 Tank can be used with almost any low power, eGo style battery. If you’re still using a low-spec, inferior glassomizer, switching to the Aspire K2 could be a simple, low-cost upgrade. The K2’s premium-quality Pyrex tank will hold 1.8ml of e juice.

Whether you choose the Aspire K2 Tank as a replacement or an upgrade, this tank offers excellent value for money. Stylish, and functional, the K2 has many of the features that you’d find on an expensive sub-Ohm tank. The K2 is fitted with a luxurious, stainless steel drip-tip. The drip-tip is a replaceable ‘510’ type, so it’s easy to swap for a custom alternative. 

Airflow is pre-set for relaxed, mouth-to-lung vape – a lot like a filtered cigarette. This is a ‘bottom-fill’ glassomizer. After unscrewing the bottom section, you simply drip your e juice down the inside of the Pyrex glass. That Pyrex glass is an important feature! As well as being tough and heatproof, it also resists acidic e juice flavours like spice and citrus fruits.

The K2 Tank uses Aspire’s acclaimed ‘BVC’ replaceable coils. These coils are specially designed to extract incredible flavour from your e juice. A thick, organic cotton wick soaks up the juice, before it is ‘atomized’ by a heated vertical coil. The result is a luscious cloud of richly flavoured vapour. Typically, a K2 BVC atomizer coil will last up to 3 or 4 weeks. It’s quick and easy to screw a new coil into the bottom section of the glassomizer tank.

Super clean and easy to use, the Aspire K2 Glassomizer comes with an incredibly low price tag as usually comes with the Aspire K2 starter Kit.

Choose either a Black or Stainless Steel finish.

1 x Aspire K2 Glassomizer Tank
1 x Aspire 1.6 Ohm BVC Kanthal Atomizer Coil Preinstalled
1 x Replaceable 510 Drip Tip (Pre-Fitted)
1 x Filling & Coil Change Guide

Aspire K2 Glassomizer Features:
Capacity: 1.8ml
Diameter: 15mm
Standard 510 battery connector 
Compatible with any low power 510 battery
Comes with 1 x 1.6 Ohm Bottom Vertical Coils (Preinstalled)
Replaceable 510 drip tip
Tough, acid resistant Pyrex tank glass
Easy bottom fill mechanism
Easy BVC coil changes
Pre-set mouth to lung (MTL) airflow
5 star Aspire manufacture & design
Excellent value for money
Great cloud volume
Amazing e juice flavour
Available with Stainless Steel or Black finish.


  • Easy to top-fill 2.0ml tank - can deliver great vaping experience every time
  • Made with top quality stainless steel and Pyrex glass 
  • Supplied with coil and Japanese organic cotton wicking for max flavour
  • Optimised at 14 watts with 1.5Ω replaceable coils (sold separately)
  • Features 510 threading

Vandy Vape MESH RDA

The Mesh RDA is a 24mm RDA which is designed to be used with Stainless Steel Mesh which provide minimal spit back and consistent vapour production.

1 x Vandy Vape Mesh RDA
1 x 18.5mm Derlin Doc Drip Tip
1 x Accessory Bag
3 x Kanthal A1 Mesh Wire
3 x NI80 Mesh Wire
3 x SS316 Mesh Wire

24mm Diameter
25mm Height wthout Drip Tip
Postless Build Deck
Adjustable Airflow
O-Ring within top cap for Drip Tip
Ultem Drip Tip
Gold Plated 510 Pin


The Smok TFV8 Baby Beast Tank is a smaller version of Smok's TFV8 Tank. Featuring new coils, adjustable airflow, a top filling system and 2ml capacity.

1 x TFV8 Baby Tank
1 x V8 Baby Q2 Core (0.2ohm Dual Coils) (Pre-installed)
1 x V8 Baby X4 Core (0.15ohm Quad Coils)
1 x Replacement Glass Tube
1 x User Manual
1 x Various Spares

Capacity: 2ml
Height: 53mm
Diameter: 22mm
Weight: 47g
Thread: 510
Bottom Pair Air Slots
Adjustable Airflow System
Top Refill System

Features and Specs:

  • Dimensions: 1-13/16" x 7/8" (Including Drip Tip and Threads)
  • 22mm Diameter
  • 510 Threaded
  • 2.0ml Capacity
  • Top Fill Design with Screw Off Cap
  • Dual Airflow Slots
  • Stainless Steel Construction
  • Glass Tank
  • Compatible with SMOK Vape Pen 22 Atomizer Heads for Variable Wattage
  • Includes (2) Vape Pen Dual Coil 0.25ohm Atomizer Heads (30 - 50W)
The Smok TFV8 X Baby vape tank is the brother of the TFV8 Baby beast, bringing all the same flavour and vapour production into a top airflow design with a redesigned range of V8 Baby coils designed to accommodate the U shaped airflow. The X Baby keeps the same dimensions as the original Baby beast tank and features stainless steel and pyrex glass construction and top fill. Contains: 1x Smok TFV8 X Baby Tank 1x V8 X-Baby Q2 0.4 Ohm Coil (Preinstalled) 1x V8 X-Baby M2 0.25 Ohm Coil 1x Replacement Glass Section 1x User Manual Spare Parts Features: 2ml Capacity Top Fill Top Airflow Pyrex Glass Wide Range of Coils
Aspire Nautilus 2

1 x Nautilus 2 Tank
1 x Aspire Nautilus BVC Atomizer 0.7ohm (Pre-Installed)
1 x Aspire Nautilus BVC Atomizer 1.8ohm
1 x Extra Glass Tube
8 x Orings 
1 x User Manual
1 x Warning Card
1 x Extra Drip Tip

Top Filling
Adjustable Airflow
2ml Capacity (TPD Compliant)
New Design

1 x Aspire Cleito 120 Tank
2 x Cleito 120 Atomizer (1 pre-installed)
1 x Extra Pyrex Tube
1 x Warranty Card
1 x Vape Band
58mm x 25mm x 15mm
Capacity: 2ml
Top Fill
Enlarged wicking holes
Advanced airflow system

The Nautilus X from Aspire, the upgrade of the legendary original Nautilus. This tank represents innovation, it has been designed to provide you with a premium vaping.

1 x Aspire Nautilus X
1 x Replacement Glass Tube
1 x Replacement 1.5 ohm Kanthal Coil

Adjustable Top Airflow
Leak Proof Design
2ml Capacity
U-Tech Coil System
Ultra Low Profile Design
1.5 ohm Coil Kanthal (14-22W)
Coil Spacing 2.5mm
Height (With Drip Tip): 44mm
Width: 22mm

Innokin iSub VE Tank

Innokin iSub VE 2ml Tank with 0.5Ω SS 316L BVC head installed

Spare iSub 0.5Ω KAL BVC head

Black drip tip

Innokin Vape Band

Spare seals

Vandy Vape Phobia RDA rebuildable Dripping Atomizer Tank
Vandy Vape Phobia RDA rebuildable Dripping Atomizer Tank || 100% AUTHENTIC The vandy vape phobia is 24mm in diameter and designed with help by alex from VapersMD. Featuring a postless deck with direct bottom and side airflow, this tank offers quality taste and clouds. The phobia comes with an extra airflow barrel to work with the 24mm chuff cap meaning its great for those who love the extra airflow and it gives it a unique stylish look. Features - Size: 24x24mm Standard 510 connector and Bottom Feed Squonk Pin in kit 810 Ultem Drip Tip Single and Dual coil build deck Replaceable drip tip and tube Bottom and side airflow Can use custom 24mm chuff caps Whats included in the box - 1x 2ml Phobia RDA by Vandy Vape 1x 810 Drip Tip 1x 510 Delrin Drip Tip Adaptor 1x 24mm Chuff Cap 1x 810 Drip Tip Airflow Barrel 1x 24mm Chuff Cap Airflow Barrel 1x Gold Plated 510 Pin 1x Gold Plated Squonk Pin 1x Bag Of Spare Parts 1x User Manual “I have an effective age verification process that satisfies due diligence as described in the Business Companion guide for online age verification checks and I will not sell to persons that are under 18 years old”.
Hellvape Dead Rabbit RTA Hellvape Dead Rabbit RTA Tank Atomizer is the brand new RTA tank, which is collaborated design by Vapin' Heathen and Hellvape. Features 25mm diameter, the Dead Rabbit RTA. The Dead Rabbit RTA introduces an unique “Rabbit Ear” design, with ample build space and generous post holes, which not only gives you the option of single or dual coil builds, but also in general enables you to get a lot more creative. Unlike most RTAs, the Dead Rabbit RTA comes with top side diagonal airflow design, focuing on flavor and effectively making it leak proof. Its knurled grip top refill has the quick access design for convenient refill access, furthermore, the Hellvape Dead Rabbit RTA includes a colored resin dip tip, a black resin tip, and a 510 adapter for your convenience. With unique post deck and top side airflow, this Dead Rabbit RTA will bring you nice flavor and an amazing vaping experience 25mm RTA Unique ‘Rabbit Ear’ design Ample build space and generous post holes Slide in top coil deck takes the guesswork out of pre-cutting your coil leads Adjustable top side diagonal airflow with a focus on flavor and to minimize leaking Single or dual coil configurations Gold plated positive post for better conductivity Knurled grip to remove top cap and refill with ease Post screws fasten to the flat side of the coil lead to preserve your build 2ml juice capacity Two 810 drip tip options including a colorful resin tip and a white/black resin tip and a 510 adapter Slotted or hex head post screw options Protruding 510 pin and peek insulation Contents 1 x 25mm Dead Rabbit RTA 1 x Resin 810 DT (Random Colours) 1 x Stainless Steel 510 Adapter 1 x Accessories Bag 1 x Dead Rabbit Sticker 1 x Instruction Manual 1 x Free Replacement Glass Packaged 1OO ML ELIQUID WE SEND RANDOMLY , PLEASE ADD A NOTE IF YOU NEED ANY SPECIFIC FLAVOR & STRENGTH , WE TRY TO SEND YOU SIMILAR AS MUCH WE CAN “I have an effective age verification process that satisfies due diligence as described in the Business Companion guide for online age verification checks and I will not sell to persons that are under 18 years old”
10 X CE4 ATOMIZERS Glass Atomizer Clearomiser Cartomizer ECig Shisha Pens Tanks
Key Specifications/Special Features:

Normal working voltage: 3.3 to 4.2V
Atomizer capacity: 1.6ml
Compatible with most batteries
No leakage no burned taste,easy refilling
Each clearomizer will hold 1.6mL liquid, keep around 500 to 600 puffs
Charge voltage: 110 to 220V

Instructions For Use

Remove the mouthpiece from the top of the atomiser

Carefully fill the atomiser with E-liquid AVOIDING allowing e-liquid into the centre chamber.

Replace the mouthpiece

Allow 60 seconds for the wick to absorb the liquid

This listing contains NO Nicotine!!!!
  • 22mm Diameter
  • Pyrex Glass Tank
  • 2mL Liquid Capacity
  • Delrin Wide Bore Drip Tip

Innokins iClear 20D is one of the easiest and most user friendly tanks currently available. It features a quick and easy top fill design, 2 mL capacity, top airflow, and is extremely compact. The iClear 20D is an excellent as its top fill design and easy coil swap system make it very user friendly. Note: The Iclear 20D is only compatible with the Innokin EZ TC Compatible with: iClear 20D Coils This Product Features: 22mm Diameter Pyrex Glass Tank Stainless Steel Construction 2mL Liquid Capacity Delrin Wide Bore Drip Tip Removable Drip Tip Top Fill Top Airflow You Will Receive: 1x - iClear 20D Tank

Aspire Cleito Tank

Aspire’s Cleito tank, This is a top-filling tank that has been revised and is Now TPD Compatible with a liquid capacity of 2ml with the pre installed coil, However the old Cleito Coils are also compatible which will allow for more juice should you wish to use them later down the line.

The TRPR version of the Cleito has a 2ml capacity and ships with a 0.16Ω coil as standard, Spare Included.


1 x Cleito 2ml Tank

2 x 0.2ohm clapton coil (1 x installed, 1 x spare)

1 x Spare Drip tip

2 x Spare O-rings

1 x Warranty Card

1 x User Manual


Capacity: 2ml (TPD version)/ 3.5ml (Standard version – if using old Cleito coils)

Thread: 510 thread


Product Description

Awesome vapor clouds with the new Aspire Nautilus Mini BVC, (Bottom Vertical Coil) technology and an improved four-port adjustable airflow system. It leads a new revolution in coil technology. Pure taste with the Pyrex Glass tank. 

Aspire Mini nautilus bvc Clearomizer Specification:

Material:  Stainless steel and Pyrex glass

Type:  Bottom vertical coil. BVC coil

Color: clear

Advantage: BVC coils, 1.8ohm, huge vapor, no burnt smell

Thread : 510/ (ego with adaptor)

Package: gift box

four-port adjustable airflow system



1. Newest BVC Technology, vapor increased 15%

2. Elegant Modern Body Shape

3. Replaceable stainless drip tip

4. Pure taste no burning and no leaking

5. Stainless steel outlook and Glass tube

6. Elegant Modem Body Shape

7. CE,RoHs,FCC

Packing List

Aspire Nautilus Mini Tank

1  pcs  coil installed

Aspire Nautilus BVC coil(spare)

1 pcs

 eGo Adaptor

1 pcs

User Manual 

1 pcs

Packages box

1 pcs

1 SMOK TFV8 Baby Tank
1 V8 Baby-Q2 Coil Head
1 Replacement Glass TubeSpare Parts
Instruction Manual
Vandy Vape PYRO 24 RDTA Tank
Vandy Vape Pyro 24 RDTA

The Vandy Vape Pyro features a postless build deck with combined side and under-coil airflow. A 2ml, TPD compliant tank below the deck ensures that the coils are continuously fed with e juice. This 24mm diameter atomizer is suitable for dual and single coil builds.
With its Ultem tank and drip tip, the Vandy Vape Pyro 24 RDTA is one of the most eye-catching rebuildable dripping tank atomizers on our shelves. From day-one of its release, this Stefen Zhang designed RDTA has built a growing reputation for top-tier flavour. 

Vandy Vape CEO, Stefen Zhang is the brain behind many of the most popular rebuildable atomizers released over the last few years. The Pyro’s unique airflow system is another example of Stefan’s genius. Dual ‘T’ shaped adjustable airflow ports direct airstreams towards the centre of the deck. A curved ‘scoop’ below each coil intercepts part of the airstream, diverting it around the coil.

This innovative arrangement intensifies cloud volume and flavour. Flavour and vapour density are further concentrated in the conical top-cap, before being drawn through the Goon style wide-bore drip-tip.

Flat decks are great for fast, simple building. For consistent performance, the coil wicks are inserted into two (rather than four) enlarged wicking ports. The postless deck is also drilled with two 3mm holes for tank refills. To prevent e juice leaks, the airflow cap is machined with two studs that close-off the refill holes.

If you’re not a fan of Ultem, there’s an alternative Pyrex glass tank section in the box. There’s also an alternative Delrin drip-tip and 510 adapter in the spares bag. The Vandy Vape Pyro RDTA comes with gold-plated terminal screws in a range of alternative head options. The protruding gold-plated positive pin is compatible with hybrid mechanical mods. The Pyro kit doesn’t include coils or cotton.

This flavour-chasing RDTA is available with a Gold, Silver, Black or Rainbow coloured top-section.

1 x VandyVape Pyro 24 RDTA
1 x Wide Bore Ultem Drip-Tip (Fitted)
1 x Delrin Tip Dock (Alternative)
1 x 510 Drip-Tip Adapter
1 x Transparent Pyrex Glass (Alternative)
1 x Spare Seals Screws & Multi-Tool

VandyVape Pyro RDTA Features:
Base diameter: 24.4mm
Height: 34.5mm (without drip-tip)
TPD tank capacity: 2ml with silicone insert
Type: Rebuildable dripping tank atomizer with postless deck
Suitable for dual or single coil builds
Comes fitted with gold-plated positive pin 
Pin compatible with mechanical, hybrid & regulated mods
Stainless Steel sleeve with adjustable ‘T’ shaped airflow slots
Two-way airflow – sideways & below coil
Specially curved airflow scoops below coils
2 x 3mm e juice fill ports on build deck
Studs on airflow cap seal the fill ports
Gold-plated terminal screws
Comes with Phillips/flat & hex headed screws
Comes with 3 way multi-tool for building
2 x large wicking holes for easier wick placement
Wicks draw e liquid from 2ml tank
Comes with Ultem (fitted) & Pyrex glass tanks
Deck designed for fast, easy building
Fitted with a Goon style 810 Ultem drip-tip
Comes with an 18.5mm Delrin dock tip
510 drip-tip adapter in spares bag
Comes with O rings for long-term maintenance
Stylish castellation on airflow adjuster
Premium flavour performance
Rich cloud production

Superbly designed by Stefen Zhang
Available in Silver, Black, Gold or Rainbow colours

This amazing atomizer comes with three different drip tips. Try them all to find out which one suits you best. The kit also includes a 510 drip-tip adapter. The Kylin RTA has a fairly standard top-fill mechanism, though the top-section features chunky castellation for a better grip. A castellated ring below the glass section allows you to close off the e juice ports during filling – a very welcome feature on an RTA!

It’s the Kylin RTA’s airflow that makes the tank such a star performer. Air from the 2 adjustable slots on the tank’s base is directed up to 4 large ports on the build deck. Each of the dual coil positions is fed with direct air from below and angled air from the side. This creates a huge vortex of air around each coil. The end result is colossal cloud volume with surprising depth of flavour.

Building is incredibly simple on the Kylin’s flat deck. Though the deck is designed for big, dual coil builds, it’s just as easy to lay a single coil across 2 of the 4 terminal connectors. Coil terminals are held in the secure grip of hex-headed grub screws. Spare screws and an Allen key are also included in the box. The spares kit also includes a special key to help you dismantle the tank for building or deep cleaning.

1 x Vandy Vape Kylin RTA With 2ml Tank
1 x Fitted 16mm Delrin Drip-tip
1 x 14mm Drip-tip
1 x 17.5mm Drip-tip
1 x 510 Drip-tip Adaptor
1 x Alternative Pyrex Glass (6ml)
1 x Chimney Extension

Features Specifications
Capacity: 2ml
Diameter: 24mm
Type: Rebuildable tank atomizer (RTA)
Tank glass: Toughened Pyrex
Alternative 6ml Pyrex glass section supplied
Fitting: 510 screw with gold-plated adjustable positive pin
Stainless Steel case with excellent build quality
Top-fill design (unscrew top section)

Dual kidney fill ports
Juice flow control ring
Click-stop airflow control ring (2 slots)
Deep, no-slip castellation on all control rings
Comes with 14, 16 & 17.5mm Delrin drip-tips
Comes with 510 drip-tip adaptor
Comes with tools & spare seals
24 carat gold-plated build-deck
Flat, postless build-deck design
Dual coil build capability
Accommodates single coil builds
Easy access to deck for building
4 Hex-headed (Allen) terminal screws
Easy access to terminal screws
Individual, below-coil airflow ports
Individual, angled airflow to side of each coil
Easy building & wicking
Generates phenomenal cloud volume
Delivers incredible flavour

SMOK TFV12 cloud beast king tank

100% GENUINE SMOK TFV12 cloud beast king sub ohm tank


The beast tank has grown to be unprecedented strong and wild, , The newest TFV12 Sub ohm tank is coming with the ever biggest & cloud-chasing coil heads: the V12-T12 (Twelve Coils) and V12-X4(quadruple coils) and V12-Q4 (quadruple coils), which definitely makes it to be the cloud beast king for the year 2017, Innovation keeps changing the vaping experience!
1. Bigger Bottom Air Slots
2. Bigger Heating Air Tube
3. Max Wattage 350W
4. Super Large Caliber Delrin Drip Tip
5. Top Refill System
Packing list:
1x TFV12 Cloud Beast King
1x V12-T12 0.12ohm(Pre-installed)
1x V12-X4 Quadruple Coil Head(0.15ohm
1x V12-Q4 Quadruple Coil Head(0.15ohm)
1x Replacement Glass Tube
1x User Manual
1x Spare Parts
1x Gift Box With anti-fake label
Aspire Athos Tank
The Aspire Athos tank is a high-performance sub ohm vape tank designed for a direct to lung vape. The Athos is constructed with pyrex glass and stainless steel, and can be completely dismantled for easy cleaning and replacement of parts.

Available in Silver, Black & Rainbow

1 x Aspire Athos Tank
1 x A5 0.16 Ohm Coil (Preinstalled)
1 x A3 0.3 Ohm Coil
1 x Spare Glass Section
1 x Spare Drip Tip
12 x Spare O Rings
User Manual
Warranty Card

Aspire Athos Tank
51mm Height
25mm Diameter
2ml Capacity
Bottom Adjustable Airflow
Top Filling Design
Metal Protective Sleeve Over Glass Tube
Replaceable Clear or Delrin Drip Tip

The Hell Vape DROP DEAD RDA is an epic collaboration with Vapin' Heathen and The Vapor Chronicles to create a rebuild-able masterpiece based on the designs of the Dead Rabbit and DROP RDA. The DROP DEAD RDA is constructed with durable Stainless Steel with high-level design elements HellVape have come to known from, with the new iconic logo etched onto the wall sleeve. 

DROP DEAD RDA by Hell Vape Features:

A Vapin' Heathen Project

A TV Creation - The Vapor Chronicles

24m Diameter

Deep Juice Well

Superior Stainless Steel Construction

Four Post Build Deck Design

Side - Secured via Slotted Flathead Screws

Gold-Plated Positive Posts

PEEK Insulated Block

Single or Dual Coil Configurations

Dual Side Airflow Control - Multi-Slots Design

810 Resin Wide bore Drip Tip

810 Acrylic Wide bore Drip Tip

510 Drip Tip Adapter

Squonk - Ready Bottom-Feeding 510 Pin 

Gold-Plated 510 Contact Pin

Available in Black, Full Matte Black, Gunmetal, Stainless Steel, Purple, Blue Rainbow

Horizon Falcon Sub Ohm Tank
HorizonTech Falcon Sub-Ohm Tank with the top filling and adjustable bottom airflow system, is the convenient atomizer for vaping. Working with the Falcon Coil that made of the wood pulp, flax fiber and cotton,HorizonTech Falcon Tank brings the best flavor
1. Constant peak flavor, high heat resistance, long lifespan
2. Convenient top filling system with adjustable bottom airflow system
3. Four kinds of innovative coils available with different pure flavor provides great vaping experience
4. Equipped with colourful resin drip tip
These come with the removable bung inside the tank.
1 x HorizonTech Falcon Tank
1 x Set of O-Ring
1 x Drip Tip
1 x Extra Coil
1 x Glass Tube
Horizon Falcon Sub-Ohm Tank Horizontech Atomizer
Product Features:         
Horizon Falcon Sub-Ohm Tank features a luxurious chassis design with triple bottom airflow system 
Adopting a new coil technology with innovative flax and wood pulp materials 
25.2mm Base Diameter 
24mm Glass Diameter 
7ml Maximum Juice Capacity 
Superior Stainless Steel Construction 
Pyrex Glass Reinforcement 
Convenient Threaded Top-Fill Method 
Bottom Airflow Control - Triple Slotted Design 
Horizon Falcon Coil Technology 
0.2ohm F1 Coil:- 30% Wood Pulp & 70% Cotton - rated for 80W (Included) 
0.2ohm F2 Coil: - Natural Flax Fiber - rated for 80W (Not Included) 
0.2ohm F3 Coil: - Flax Fiber & Flax Paper - rated for 70W (Not Included) 
0.15ohm M1 Mesh Coil: - Mesh Design with Wood Pulp & Cotton - rated for 70W (Included) 
Sloped Resin Widebore Drip Tip 
Gold-Plated 510 Connection 
Product Specifications:  
Brand:  Horizon 
Atomizer Type:  Sub-Ohm 
Tank Capacity 2ml
Package Contents:  
1 x HorizonTech Falcon Tank 
1 x 0.2ohm F1 Falcon Coil 
1 x 0.15ohm M1 Mesh Falcon Coil 
1 x 5ml Spare Glass Tube 
1 x Set of O-Rings 
Per Page      1 - 33 of 33
  • 1